Türkçe

Your language: ▼

Her gün sizlere, piyasa değeri onlarca dolar olan bir programı tamamen ücretsiz olarak sunuyoruz!

$39.95

SÜRESI DOLMUŞ

Giveaway of the day — File Uneraser 2.1

RaidRaidLabs File Uneraser silinmiş dosyalarınızı kurtarır.

$39.95 SÜRESI DOLMUŞ

Kullanıcı puanı: 185 Yorum yapın

File Uneraser 2.1 giveaway olarak 6 Eylül 2015 tarihinde sunulmuştu

File Uneraser 2.1 deneme sürümünü indir

Bugün Giveaway of the Day

$12.00 / month

Bugün bedava

Tipard TS Converter 9.2.32

Easily convert TS files to various formats.

İndirme sayfasına gidin

RaidLabs File Uneraser silinmiş dijital resimler, müzik, video, RAR ve ZIP arşivler gibi doküman ve dosyaları gerçek anlamda kurtarmaktadır. Bu dosya kurtarma programı özel bir dosya veya dokümanı sildiğinizde kurtarmanıza yardımcı olur. File Uneraser dosyaları tüm depolama aygıtlarından sorunsuzca kurtaracaktır.

İlaveten, bu kurtarma programı NTFS-şifreli ve sıkıştırılmış dosyaları virüs saldırısı veya istenilmeyen kullanıcı hataları sonucu kaybedilen dosyalarda da işe yaramaktadır.
File Uneraser'ı ücretsiz ve önizlemeli şekliyle deneyin.

File Uneraser Business Lisansını ve File Uneraser Professional Lisansını %50 indirim ile satın almak için kod: giveawayoftheday50

Sistem Gereksinimleri:

Windows 2000/ XP/ 2003/ Vista/ 7/ 8

Yayıncı:

RaidLabs Inc.

Web sayfası:

http://raidlabs.com/unerase/unerase.php

Dosya boyutu:

12.4 MB

Fiyat:

$39.95

Öne çıkan programlar

Raid Recovery

RAID Recovery is able to handle almost all problems with RAID arrays and Dynamic Disks. Regardless of whether the failure was due to hardware or software glitch, damaged disks or failed RAID controller, RAID Recovery can easily re-create the array and also recover info with or without the original controller. With Raid Recovery it is possible to recover data from RAID arrays of every variation.

File Uneraser 2.1 üzerine yorumlar

Thank you for voting!
Please add a comment explaining the reason behind your vote.

Öne çıkan İngilizce yorumlar

By any chance does anyone know of any really good software that can open and recover files from an older IDE hard drive ?? I can hear sounds inside it when I try to get it running but thats as far as it goes .
I have seen and tried lots of Recovery types of software but none helped so far .

I am open to suggestions .

Karaokeman tarafından yorumlandı – 9 years ago – Bu yorumu yararlı buldunuz mu? evet | hayır (-5)

Çevir

If you can't get the data off the drive because it won't boot up then put it into a USB caddy, if the system can see the drive then you should be able to retrieve your data.
If the system can't see the drive then the drive is probably kaput.

XP-Man tarafından yorumlandı – 9 years ago – Bu yorumu yararlı buldunuz mu? evet | hayır (+40)

Çevir

The only(!) recovery software that was able to get my files back after a hdd fail (it suddenly was unformated RAW) was Get Data Back. All others I tried, and I tried lots, failed miserably. However, that was quite a while ago. There were two versions of the software one for NTFS and one for FAT drives. If IDE or SATA doesn't really matter to any kind of recovery software.

Spiritogre tarafından yorumlandı – 9 years ago – Bu yorumu yararlı buldunuz mu? evet | hayır (+21)

Çevir

Will this provide also the possibility to create a bootable disk or it works just and only from Windows?
(working under windows to recover files on the same hard disk where windows is installed reduces considerably the possibility to unerase delete/lost files)

Gio tarafından yorumlandı – 9 years ago – Bu yorumu yararlı buldunuz mu? evet | hayır (+24)

Çevir

Will File Uneraser 2.1 help any in salvaging files that are encrypted by ransomeware?

Steven tarafından yorumlandı – 9 years ago – Bu yorumu yararlı buldunuz mu? evet | hayır (+10)

Çevir

No, if they are encrypted, they must be decrypted. This product can not do that.

BobbyA tarafından yorumlandı – 9 years ago – Bu yorumu yararlı buldunuz mu? evet | hayır (+17)

Çevir

Files are usually written this way by pretty much any OS, but we will deal only with Windows today.

On any hard drive, there is a catalog entry which points to the actual file. This item resides with all the other catalog entries on the drive. This catalog is near the beginning of the drive, usually after the boot sector and the disk allocation map or file allocation table which maps out the sectors of the drive as being in use or available.

The catalog holds the names of all the files on a particular drive as well as the address where the file starts and ends. A catalog entry consists of a header, the filename and a footer. The really important part for us today is the header, which tells it where a file resides on the disk, how long it is and points to the first and last sectors. Each sector within the file itself has information pointing to both the previous and next sectors of the file in its header.

In the header of the filename, one of the bits of information is whether a file is present, deleted, or inaccessible to a particular user. Program Files, for example, are not available to be written on by the user. Not directly, anyway. In fact, if you have tried to write anything in the directory called "Program Files" or "Program Files (x86)", you most probably have had no success because the system will not let you do that.

When a file is deleted by the user putting it in the wastebasket on the desktop (the usual way for most Windows users), for example, the only action that happens on the drive is that the bits in the file's catalog entry which identify the file's accessibility, mark it as deleted and the "file allocation table" marks the sectors which the file occupied as available. Nothing else really happens at this point. When a file is marked as deleted, the OS doesn't see it anymore and if you ask for a directory listing, you will not see that filename anymore, even though the file is still on the disk in its entirety. Thus, a newly deleted file can be retrieved in its entirety with almost 100% success.

Any writing the disk does after you delete a file this way may or may not overwrite any given sector previously occupied by the just deleted file, depending on the need for the disk's firmware to use these sectors. If the disk is new and practically empty, the firmware will have a tendency to use later contiguous sectors to make file access faster, rather than break up the file by separating it into parts stored here and there. If, on the other hand you have deleted a long, multi-megabyte file, and subsequently written a few files occupying only several kilobytes each, such as game saves, chances are that parts of the deleted file may be overwritten, and thus become irretrievable. The more time has elapsed and your system has written files after a file deletion, the less chance you have of retrieving a file.

(A defragmenting program rewrites the files so that they are in contiguous sectors, thus speeding up file access and having the effect of making disk access faster. Find out more about this on your own. It is not part of this discussion.)

If you have a utility which really deletes a file by rewriting all the sectors previously occupied by the file by blanking out the sectors, or even more thoroughly scrubbing by repeatedly rewriting over the sectors in question, then the file is gone, really gone. For example, one file manager named PowerDesk Pro erases files thoroughly, though how thorough it is I've never tried to find out.

Today's program, and all its cousins by whatever name, deals most effectively with recently deleted files and is usually quite successful in doing its job, the sooner after a file deletion, the better. After too many files being written after a file deletion, even games saves, a file may become irretrievable, even by a program such as today's offering, though I don't know how much success these programs are. Thus it is best to use this program as soon as possible after an accidental file deletion.

If you need more information, you will have to find it on your own, but it is available on the web.

Files are usually written this way by pretty much any OS, but we will deal only with Windows today.

On any hard drive, there is a catalog entry which points to the actual file. This item resides with all the other catalog entries on the drive. This catalog is near the beginning of the drive, usually after the boot sector and the disk allocation map or file allocation table which maps out the sectors of the drive as being in use or available.

The catalog holds the names of all the files on a particular drive as well as the address where the file starts and ends. A catalog entry consists of a header, the filename and a footer. The really important part for us today is the header, which tells it where a file resides on the disk, how long it is and points to the first and last sectors. Each sector within the file itself has information pointing to both the previous and next sectors of the file in its header.

In the header of the filename, one of the bits of information is whether a file is present, deleted, or inaccessible to a particular user. Program Files, for example, are not available to be written on by the user. Not directly, anyway. In fact, if you have tried to write anything in the directory called "Program Files" or "Program Files (x86)", you most probably have had no success because the system will not let you do that.

When a file is deleted by the user putting it in the wastebasket on the desktop (the usual way for most Windows users), for example, the only action that happens on the drive is that the bits in the file's catalog entry which identify the file's accessibility, mark it as deleted and the "file allocation table" marks the sectors which the file occupied as available. Nothing else really happens at this point. When a file is marked as deleted, the OS doesn't see it anymore and if you ask for a directory listing, you will not see that filename anymore, even though the file is still on the disk in its entirety. Thus, a newly deleted file can be retrieved in its entirety with almost 100% success.

Any writing the disk does after you delete a file this way may or may not overwrite any given sector previously occupied by the just deleted file, depending on the need for the disk's firmware to use these sectors. If the disk is new and practically empty, the firmware will have a tendency to use later contiguous sectors to make file access faster, rather than break up the file by separating it into parts stored here and there. If, on the other hand you have deleted a long, multi-megabyte file, and subsequently written a few files occupying only several kilobytes each, such as game saves, chances are that parts of the deleted file may be overwritten, and thus become irretrievable. The more time has elapsed and your system has written files after a file deletion, the less chance you have of retrieving a file.

(A defragmenting program rewrites the files so that they are in contiguous sectors, thus speeding up file access and having the effect of making disk access faster. Find out more about this on your own. It is not part of this discussion.)

If you have a utility which really deletes a file by rewriting all the sectors previously occupied by the file by blanking out the sectors, or even more thoroughly scrubbing by repeatedly rewriting over the sectors in question, then the file is gone, really gone. For example, one file manager named PowerDesk Pro erases files thoroughly, though how thorough it is I've never tried to find out.

Today's program, and all its cousins by whatever name, deals most effectively with recently deleted files and is usually quite successful in doing its job, the sooner after a file deletion, the better. After too many files being written after a file deletion, even games saves, a file may become irretrievable, even by a program such as today's offering, though I don't know how much success these programs are. Thus it is best to use this program as soon as possible after an accidental file deletion.

If you need more information, you will have to find it on your own, but it is available on the web.

Save | Cancel